Home > Help Center > News
News
Member
Products & Orders
Payment
Shipping & Costs
Sand Control System Regulation
Sand control system Waterjet Parts regulation in use

Waterjet cutting machine parts after using a period of time, waterjet parts sand control valve body will accumulate a number of fine sands, if we do not timely remove the fine sands, then sand supply system is likely to cause blockage, leading off the sand, bring trouble to cutting work. In order to ensure that the water jet cutting machine to work properly, the sand supplying system must be kept smooth, to keep smooth the sand supply system, it is necessary for regular cleaning of the sand system Waterjet Parts. In the clean-up sand system waterjet parts process, we should pay attention to the following matters:

1, The sand grain size should comply with use standard, not too big or too small, or evenness bad;

2, Sand flow too large will cause backwater, too small will affect the cutting speed, through experiments to find the correct sand supply flow standard;

3, For cutting operation, in accordance with the requirements of waterjet parts technology operating instruction, first open water, then open sand; first off the sand, then off the water;

4, Every day after work to pull out the sand supply pipe from the nozzle body, to prevent the deposit of sand and cause backwater.